Epson Projector Startup Guide

Equipment Included:

Epson PowerLite 1925W Projector
Power cable
HDMI cable
Logitech presentation remote (with USB receiver)

Step-by-Step Setup Guide

Step 1: Unpacking and Inspection

Carefully remove the projector, power cable, HDMI cable, and remote from the carrying case.
Inspect all items for visible damage.

Step 2: Power Connection

Connect the provided power cable to the projector’s power input.
Plug the other end into an available power outlet.

Step 3: Video Input Setup

Connect the HDMI cable from your laptop or other source device to the projector's HDMI port.

Step 4: Starting the Projector

Press the power button on the projector’s control panel or remote.
Wait until the projector fully warms up and displays the Epson logo or input image.

Step 5: Source Selection

Press the "Source Search" button on the projector if the image does not appear automatically.

Step 6: Adjusting the Projection

Use the "Screen Fit" feature or manually adjust the focus and zoom with the respective knobs on the projector.

Step 7: Using the Logitech Remote

Insert the Logitech USB receiver into your laptop.
Ensure it is functioning by testing the forward and backward buttons on a slideshow.

Step 8: Shutdown Procedure

Press the projector’s power button twice to initiate shutdown.
Allow the projector to cool down before disconnecting cables.

Step 9: Packing Equipment

Carefully coil and secure cables with provided cable ties.
Place the projector and accessories back in the carrying case neatly.

Troubleshooting Tips:

No Image Displayed: Ensure HDMI cables are securely connected, and correct input source is selected.
Projector Does Not Power On: Check power cable connections and power source availability.
Remote Not Responding: Verify the USB receiver is properly inserted, and replace batteries if needed.